光纤通信高温老化房广泛应用于电源电子、电脑、通讯、生物制药等领域产品的老化试验，是针对于高性能电子产品仿真出一种高温、恶劣环境测试的设备，是提高产品稳定性、可靠性的重要实验设备是各生产企业提高产品质量和竞争性的重要生产流程。下面小编给大家介绍一下影响老化房价格的因素有哪些?第一:房间大小(房间大小决定风机选型，风机数量，风管大小)
Optical fiber communication high temperature aging room is widely used in aging test of power electronics, computers, communications, biopharmaceuticals and other fields. It is a high temperature and harsh environment test equipment for high performance electronic products. It is an important experimental equipment to improve product stability and reliability. It is also an important production process for enterprises to improve product quality and competitiveness. What are the factors that affect the price of the aging house? First, the size of the room (the size of the room determines the type of fan, the number of fans, the size of the duct) 通常市面有轴流风机、离心风机、风柜来制作
Usually there are axial flow fans, centrifugal fans and air cupboards on the market.
离心风机安装于光纤通信高温老化房顶部，再根据风机的功率以及房间的大小设计相应的风管数量，每条风管连接至室内底部，在每条风管上安装2个双层百叶出风口，出风口可以调节出风的方向。然后再从顶部的回风口出风进行循环。一般房间不是很大的老化房采用离心风机主。
The centrifugal fan is installed on the top of the high temperature aging room of optical fiber communication, and then the corresponding number of air ducts is designed according to the power of the fan and the size of the room. Each air duct is connected to the bottom of the room. Two double-layer louver outlets are installed on each air duct, and the outlet can adjust the direction of the air outlet. Then the air is circulated from the top return air outlet. Centrifugal fans are used in ageing rooms which are not very large in general.
轴流风机安装于光纤通信高温老化房顶部，在天花上装根据风机的数量装相应的百叶窗口，采用上面出风上面回风的概念，此方法造价低廉，温度均匀度可控性不高，因为热气是从下往上的
Axial flow fan is installed on the top of high temperature aging room of optical fiber communication, and the corresponding shutters are installed on the ceiling according to the number of fans. The concept of return air on the upper outlet is adopted. This method has low cost and low controllability of temperature uniformity, because the hot air is from the bottom to the top.
风柜主要是光纤通信高温老化房的房间太大，跨度过宽，温度均匀度要求过高，如果房间很大的话用立新风机数量相应增加，噪音将会很大。此造价成本很高，
Windshield is mainly optical fiber communication high temperature aging room room room is too large, span is too wide, temperature uniformity requirements are too high, if the room is large, the number of vertical fresh fans will increase correspondingly, the noise will be very large. The cost is very high.
第二：温度范围(温度范围不同选用材料不同)
Second: Temperature range (different materials are selected for different temperature range)
通常做光纤通信高温老化房的材料有2种;EPS彩钢板和岩棉彩钢板。彩钢板主要用于常温到60度范围的老化，EPS彩钢板俗称泡沫板，不阻燃，它不符合《建筑材料燃烧性能分级》B2级的规定，在60度以下长期使用没有问题，
Usually, there are two kinds of materials for high temperature aging room of optical fiber communication: EPS color steel plate and rock wool color steel plate. Color steel plate is mainly used for aging at room temperature to 60 degrees. EPS color steel plate, commonly known as foam board, is not flame retardant. It does not meet the requirements of grade B2 for classification of combustion properties of building materials. There is no problem in long term usage below 60 degrees.
岩棉彩钢板是在老化温度为60度以上，它阻燃，符合《建筑材料燃烧性能分级》A级的规定
Rockwool coloured steel sheet is flame retardant at ageing temperature above 60 degrees, which meets the requirements of Class A of Combustion Performance Classification of Building Materials.
另外市面上还有一种聚氨酯彩钢板，它的最高耐温为85度，可燃，如果燃烧的话有有害气体产生，只有专业的公司才采用此材料，并且造价又贵。
In addition, there is also a polyurethane color steel plate on the market, its maximum temperature resistance is 85 degrees, flammable, if burned, there are harmful gases generated, only professional companies use this material, and the cost is expensive.
第三：需要老化的产品以及产品功率(产品的不同涉及到产品是否发热，功率涉及到里面供电的配置)
Thirdly, the products that need to be aged and the power of the products (the difference of the products involves whether the products are heated or not, and the power involves the configuration of the power supply inside).
老化产品的功率：在光纤通信高温老化房内，要给产品的老化架供电，功率涉及到线材的大小和数量，如果产品发热涉及到线材采用民用或军用线材。
Power of aging products: In the high temperature aging room of optical fiber communication, power supply for the aging frame of products is needed. Power involves the size and quantity of wire rods. If the heating of products involves the use of civil or military wire rods.
四：温度均匀度要求
IV: Temperature uniformity requirements
光纤通信高温老化房的温度一般40度的时候±1℃，50的时候±3℃，60℃
The temperature of high-temperature aging room of optical fiber communication is generally 40 degrees (+1 C), 50 degrees (+3 C), 60 degrees (?)
以上为±5℃，如果60℃以上均匀度要求过高的话可以采用PLC实行多点控制或是以子母机的方式来控制。
If the uniformity of above 60 C is too high, it can be controlled by PLC or by the way of parent computer.
第五：常做老化的温度点和产品的总功率(涉及到排风系统，排风是根据房间大小温度范围和产品的功率来恒定在谋个温度点，当产品发热过高的时候排风机运转保证温度控制在设定的温度)
Fifth: The temperature point of aging and the total power of products (related to the exhaust system, exhaust is based on the size of the room temperature range and the power of the product to find a constant temperature point, when the product heating is too high, the exhaust fan runs to ensure that the temperature is controlled at the set temperature)
光纤通信高温老化房的常做温度点：涉及到排风系统，根据光纤通信高温老化房内产品的总功率(发热功率)，然后根据需要很定的温度，通过相应的公式算出排风机的功率，排风管的大小。
The common temperature point of high temperature aging room of optical fiber communication involves exhaust air system. According to the total power (heating power) of products in high temperature aging room of optical fiber communication, the power of exhaust fan and the size of exhaust duct can be calculated by corresponding formula according to a certain temperature.
