我们都知道电子产品上市销售之前，都会送进高温老化房进行高温老化，让我们所使用的点在产品质量提高，减少事故发生率。高温老化房是一个规模化企业的标配，每个大点的企业都会以有高温老化房而显得很上档次。现在的情况是老化房基本上都会用，但是如何最大限度的提高和发挥出高温老化房的效率？怎样将高温老化房的功效发挥到最大？
We all know that before the electronic products go on sale, they will be sent to the high temperature aging room for high temperature aging, so that we can improve the quality of products and reduce the incidence of accidents. High temperature aging room is the standard of a large-scale enterprise. Every large enterprise will be in a high grade with high temperature aging room. Now the situation is that aging rooms are basically used, but how to maximize the efficiency of high-temperature aging rooms? How to maximize the effectiveness of high temperature aging room?
高温老化房，听名字就可以知道，最重要的是保持高的温度，制造恶劣的环境。说实话，别的附加手段有没有目前还不知道。作为高温老化房，想发挥出它最厉害的功效基本上就得从它的生产标准，准则，不能违规操作，及时检修做起，这才是王道。
High temperature aging room, you can know by name, the most important thing is to maintain a high temperature, create a bad environment. To be honest, it is not yet known whether there are other additional means. As a high temperature aging room, if you want to play its most powerful role, you basically have to start from its production standards, standards, not illegal operation, timely maintenance, which is the kingdom.
在老化房运作时，我们要注意房间里的干净明亮，宽敞，在极小的容积里面，有及其小的体积。同时保持绝对的安静，不能有一丝的声音，以免影响效果，在通风上面也要注意，保障必要的通风环境，同时经常对通风环境进行检测，以保障老化房里面绝对的通风均匀，这点很重要。
In the operation of aging rooms, we should pay attention to the clean and bright room, spacious, in a very small volume, and its small size. At the same time, keep absolute quiet, not a trace of sound, in order to avoid affecting the effect, we should also pay attention to the ventilation above, ensure the necessary ventilation environment, while often testing the ventilation environment to ensure the absolute ventilation uniformity in the aging room, which is very important.
对高温房的设计，都要优化合理，对高温老化有影响的设备或者不合理之处要及时修正。各种零部件建议采用高质量，有保障的，在采购以及安装之前要细心审核排查，不能让这些细小的零部件出现了问题，得不偿失，损失巨大。在平常的时候我们要经常多这些设备进行维护和保养，争取最早发现问题，解决问题，把问题扼杀在摇篮里面。
The design of high-temperature rooms should be optimized and rationalized, and the equipment or unreasonableness that has an impact on high-temperature aging should be corrected in time. All kinds of parts and components are recommended to be of high quality and guaranteed. Before purchasing and installing, they should be carefully checked and checked. They can't cause problems in these small parts, which are not worth the money and cause huge losses. In normal times, we should often maintain and maintain these equipment, strive for the earliest detection of problems, solve problems, and strangle problems in the cradle.
